Yes, we have a an RV cover that will work well for you and your 2005 Airstream Interstate Motorhome.
I recommend the Classic Accessories Deluxe Heavy-Duty Cover for RVs, Item # CA80104. This cover fits Class B RVs that are 21 to 23 feet long. It is made of a triple-ply, weatherproof fabric that keeps out rain and snow. It also has zippered side and rear panels that gives you easy access. Its dimensions are 23 foot long x 84 inches wide x 117 inches tall. The cover has an elasticized... view full answer...
Yes, the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White # FR92PR will fit a 14-1/4" x 14-1/4" opening as that is the industry standard opening size for rooftop air conditioners. view full answer...
Hey Bob, when just the power and ground is connected on a brake actuator like the Dexter DX part # K71-651 you won't hear the unit prime itself. It would do this once a connection to trailer brakes is made which would be the blue wire that runs to the trailer brakes.
If it's running continuously I would check to make sure the breakaway switch isn't pulled or wired up wrong. view full answer...
I just spoke with my rep at Tuson RV Brakes, the manufacterer of the Tuson DirecLink Base Model Trailer Brake Controller item # 335DL-100. He said that the older units had an LCD screen that wears out over time depending on the region you live in. He said humidity gets into the display and it slowly begins to fade until the entire screen goes dark. He told me there's most likely nothing wrong with your controller and you haven't done anything wrong but you will need to replace it with the... view full answer...
Hey Bob, the Dexter electric over hydraulic brake actuator part # K71-651 can be used with the integrated brake controller of a 2012 GMC Sierra but you would need to use the adapter part # DX35FR. view full answer...
The Saris SuperClamp # SA4025F would be a great choice for your e-bikes. It is approved for use at the rear of a motorhome which has a rougher ride quality, has a higher weight capacity for the heavier weights of e-bikes and only touches the bike at the tires to protect your carbon frame. view full answer...
The Swagman Quad 2+2 Bike Rack for 4 Bikes # S64FR is fine when it comes to fenders since it uses a frame hook that clamps to the top tube and not the wheels. As for weight capacity though, I wouldn't risk it since that weight usually applies to the individual cradles and wheel straps and isn't evenly distributed by the whole bike rack. If anything happens to the bike rack, having 'too heavy' bikes will be blamed.
I have a better recommendation for you though! The Hollywood Racks Sport... view full answer...
It seems that you have an Airstream Sprinter that is built on the Mercedes Benz Sprinter 3500 chassis. You would need a hitch if you don't already have one. Here is one that we have a install video for # 75549. Then you can get the Kuat Pivot 2 # PVP20B and put the Walled Carpod # M2205-01-02 on it! This way you can get both doors open while you have cargo in the carrier. Unfortunately you will have to choose between hauling your gear or your bikes on the back your van. If you have a Kuat... view full answer...
Good question, and I checked directly with Thule and can verify for you that yes, the T2 Pro XTR bike rack is rated for use behind a motorhome, and a 170 inch wheelbase is 100 percent safe for using the rack. Thule even displays this in the directions, as you can see by the cut out I added. The correct part number for the rack is the following:
- Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches # TH83JV
The T2 Pro XTR # TH83JV is a superb choice for a bike rack, as it is super simple... view full answer...
You were on the right track! The SnapPad Xtra 4 pack of 9" pads can be found with part # SP54FR4, the same ones you were looking at. These will be a good fit for the 9" feet on your Airstream's leveling system. view full answer...
Although the grips on the # FHG84ZR handle are capable of collapsing down, the handle itself does not. However, it can be removed. Taking out the bolt and pin that connects the handle to the main body would allow you to detach the handle making it more compact for storage. view full answer...
Since your key pad isn't working it would be time to replace it. Since you have a hydraulic setup you'd need the part # LC58CJ for if you have the Lippert Power Gear system or # LC74FR if you have the Lippert Level Up system. view full answer...